Electrolux Washing Machine Error Code E10

What Does Error Code E10 Mean on a Electrolux Washing Machine?

Water inlet error — no water detected.

The washer is not detecting water entering during fill. Supply valve, inlet screens, and inlet valve are the common causes.

What Causes Error Code E10?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

1. 1
   Supply valve closed 40% of cases
2. 2
   Inlet screen blocked 30% of cases
3. 3
   Low water pressure 20% of cases
4. 4
   Inlet valve failure 10% of cases

How to Fix Electrolux Washing Machine Error Code E10

1. 1

   Check supply valves

   Both valves fully open.

2. 2

   Clean inlet screens

   Remove hoses and clean mesh screens at washer ports.

3. 3

   Test inlet valve

   Test solenoid continuity.

   🔩 Electrolux inlet valve ($35–$75)

How to Reset Error Code E10

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

When to Call a Professional

Related Error Codes

Same Code on Other Brands

Error code E10 appears on these other brands too. Click to compare:

GE Appliances Dryer E10

Motor relay failure on control board

Find Replacement Parts

Use these links to find the exact replacement parts for your Electrolux Washing Machine:

External links — ApplianceErrors.com is not affiliated with these retailers.

Frequently Asked Questions