Haier Refrigerator Error Code F1

What Does Error Code F1 Mean on a Haier Refrigerator?

Temperature sensor failure — freezer compartment.

The NTC thermistor in the freezer has failed. Temperature regulation may be compromised.

What Causes Error Code F1?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

1. 1
   Thermistor open circuit 65% of cases
2. 2
   Connector loose 25% of cases
3. 3
   Wiring harness fault 10% of cases

How to Fix Haier Refrigerator Error Code F1

1. 1

   Test thermistor

   At 32°F/0°C: approximately 16k ohms. At room temp: approximately 6k–8k ohms.

   🔩 Multimeter
2. 2

   Check connector

   Reseat thermistor connector.

3. 3

   Replace thermistor

   Clip old sensor off evaporator coil and install new one.

   🔩 Haier thermistor ($15–$40)

How to Reset Error Code F1

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

When to Call a Professional

Related Error Codes

Same Code on Other Brands

Error code F1 appears on these other brands too. Click to compare:

Samsung Microwave F-1

Keypad membrane failure — dead or stuck key

LG Oven F1

Oven temperature sensor open circuit

Whirlpool Dryer F01

Main control board failure

Maytag Dryer F01

Electronic control board failure

Find Replacement Parts

Use these links to find the exact replacement parts for your Haier Refrigerator:

External links — ApplianceErrors.com is not affiliated with these retailers.

Frequently Asked Questions