KitchenAid Dishwasher Error Code 6-2
Stuck relay on control board
A relay on the main control board is stuck in a closed or open position. This usually requires control board replacement.
What Does Error Code 6-2 Mean on a KitchenAid Dishwasher?
Stuck relay on control board.
A relay on the main control board is stuck in a closed or open position. This usually requires control board replacement.
What Causes Error Code 6-2?
Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:
- 1 Relay failure on PCB 65% of cases
- 2 Voltage surge damage 25% of cases
- 3 Moisture on board 10% of cases
How to Fix KitchenAid Dishwasher Error Code 6-2
- 1
Power cycle
Unplug 15 minutes and restart.
- 2
Replace control board
If error persists, board relay has failed.
🔩 KitchenAid dishwasher control board ($150–$350)
How to Reset Error Code 6-2
Unplug 15 minutes. If error returns, board needs replacement.
Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.
When to Call a Professional
Control board replacement requires professional service if complex wiring is involved.
Find Replacement Parts
Use these links to find the exact replacement parts for your KitchenAid Dishwasher:
External links — ApplianceErrors.com is not affiliated with these retailers.