Miele Washing Machine Error Code F16
Water protection system activated — flood protection triggered
The Miele waterproof system (Waterproof System/WPS) has detected water in the base of the machine. This is a safety lockout.
What Does Error Code F16 Mean on a Miele Washing Machine?
Water protection system activated — flood protection triggered.
The Miele waterproof system (Waterproof System/WPS) has detected water in the base of the machine. This is a safety lockout.
What Causes Error Code F16?
Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:
- 1 Door seal damaged 30% of cases
- 2 Supply hose connection leaking 30% of cases
- 3 Internal hose loose 25% of cases
- 4 Condensation buildup triggering sensor 15% of cases
How to Fix Miele Washing Machine Error Code F16
- 1
Tilt machine to drain base
Carefully tilt forward (power off) to drain base tray.
⚠️ Power off water and electricity first. - 2
Inspect door seal
Check gasket for tears or pulled sections.
🔩 Miele door seal ($40–$100) - 3
Check supply hose fittings
Inspect both ends of the supply hose for weeping.
How to Reset Error Code F16
Drain base, fix leak source, dry thoroughly. Sensor resets when base is dry.
Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.
When to Call a Professional
If no leak source found, internal hose or sump connection needs Miele authorized inspection.
Find Replacement Parts
Use these links to find the exact replacement parts for your Miele Washing Machine:
External links — ApplianceErrors.com is not affiliated with these retailers.