Samsung Dryer Error Code tE
Thermistor (temperature sensor) failure
The dryer's temperature sensor has failed or is reading out of range. The dryer cannot safely heat the drum without knowing the current temperature, so it stops the cycle.
What Does Error Code tE Mean on a Samsung Dryer?
Thermistor (temperature sensor) failure.
The dryer's temperature sensor has failed or is reading out of range. The dryer cannot safely heat the drum without knowing the current temperature, so it stops the cycle.
What Causes Error Code tE?
Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:
- 1 Failed NTC thermistor 60% of cases
- 2 Thermistor connector loose or corroded 25% of cases
- 3 Open thermistor wiring harness 15% of cases
How to Fix Samsung Dryer Error Code tE
- 1
Locate and test the thermistor
The thermistor is mounted on the heating element housing. Test resistance with a multimeter — should read ~10k ohms at room temperature.
🔩 Multimeter - 2
Check the connector
Unplug and inspect the thermistor connector for corrosion or loose fit.
- 3
Replace the thermistor
This is a simple clip-in repair. Disconnect the old sensor and plug in the new one.
🔩 Samsung dryer thermistor ($15–$40)⚠️ Unplug the dryer before any repair.
How to Reset Error Code tE
After replacing the thermistor, unplug for 1 minute then restart. The code clears when a successful cycle completes without temperature anomaly.
Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.
When to Call a Professional
If the thermistor is new and tests correctly, the control board's temperature input circuit may have failed.
Related Error Codes
Same Code on Other Brands
Error code tE appears on these other brands too. Click to compare:
Find Replacement Parts
Use these links to find the exact replacement parts for your Samsung Dryer:
External links — ApplianceErrors.com is not affiliated with these retailers.