Whirlpool Refrigerator Error Code E0
Freezer thermistor failure
The temperature sensor in the freezer compartment has failed. The control board cannot accurately read freezer temperature, which may cause over-cooling or under-cooling.
What Does Error Code E0 Mean on a Whirlpool Refrigerator?
Freezer thermistor failure.
The temperature sensor in the freezer compartment has failed. The control board cannot accurately read freezer temperature, which may cause over-cooling or under-cooling.
What Causes Error Code E0?
Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:
- 1 Thermistor open circuit 65% of cases
- 2 Thermistor connector loose 25% of cases
- 3 Wiring harness shorted 10% of cases
How to Fix Whirlpool Refrigerator Error Code E0
- 1
Locate the freezer thermistor
Usually clipped to the evaporator coil or mounted inside the freezer compartment.
- 2
Test resistance
Should read approximately 5k–16k ohms depending on temperature.
🔩 Multimeter - 3
Replace thermistor
Clip off old sensor, install new one at same location.
🔩 Whirlpool freezer thermistor ($15–$40)
How to Reset Error Code E0
After replacement, unplug 5 minutes then restart. Code clears after normal temperature cycle.
Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.
When to Call a Professional
If thermistor tests good and code persists, the control board sensor input circuit has failed.
Find Replacement Parts
Use these links to find the exact replacement parts for your Whirlpool Refrigerator:
External links — ApplianceErrors.com is not affiliated with these retailers.