MVW4505MW Error Codes — Maytag Washing Machine
🏷️ Model: MVW4505MW 📅 Production: 2022–present 🫧 Type: Washing Machine
4.5 cu ft deep-fill top loader. Current VMW platform with the standard F#E# code set; lid-lock faults clear with a power reset more often than not.
Most Common Codes on the MVW4505MW
All Other Maytag Washing Machine Codes
The MVW4505MW can also display any of the standard Maytag washing machine codes:
F9E1 Drain failure — water not draining F5E2 Lid will not lock — latch blocked or failed F5E1 Lid lock fault — cannot lock or unlock F5E3 Lid will not unlock — latch or control fault F7E1 Motor / basket speed sensor fault — drive system F7E3 Motor / drive system fault — basket not reaching speed F7E6 Motor control fault — drive electronics error F7E7 Motor unable to reach target speed F8E2 Dispenser fault — detergent dispenser system error F2E3 Control / user interface fault — communication mismatch F3E1 Water level / pressure sensor fault F6E1 Communication error — main control to motor control F20 No water detected — fill failure F22 Door lock fault — door will not lock F26 Door switch error — door state not detected F28 Serial communication error — control boards not communicating HC Hot and cold water hoses reversed LF Long fill — washer taking too long to fill oL Overloaded — load too large for the basket PF Power failure — cycle interrupted by loss of power
💡 Tip: Your model's serial sticker (door frame, rim, or back panel) confirms the exact
model number. Codes can differ between revisions of the same model line — if a code on your display
isn't listed here, check the
full Maytag washing machine code list.