ApplianceErrors.com

Broan-NuTone Range Hood Error Code F01

Medium Severity 🔧🔧 Moderate DIY Also shown as: F1

Heat sensor tripped — oven or cooktop overheating detected

The range hood's built-in heat sensor detected unusually high temperatures above the cooktop. Some connected Broan hoods automatically activate at high speed when this sensor trips. If the fan does not run after F01, the sensor circuit or board has failed.

💰 DIY cost: $0–$55 👨‍🔧 Pro cost: $150–$300 Save $150+ by doing it yourself

What Does Error Code F01 Mean on a Broan-NuTone Range Hood?

Heat sensor tripped — oven or cooktop overheating detected.

The range hood's built-in heat sensor detected unusually high temperatures above the cooktop. Some connected Broan hoods automatically activate at high speed when this sensor trips. If the fan does not run after F01, the sensor circuit or board has failed.

Models affected: Broan Elite and connected series with heat sensing

What Causes Error Code F01?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    Cooktop fire or very high-heat cooking that triggered the sensor 50% of cases
  2. 2
    Heat sensor calibration drift (sensor reading too high) 30% of cases
  3. 3
    Control board sensor input failure 20% of cases

How to Fix Broan-NuTone Range Hood Error Code F01

🔧🔧 Moderate DIY Est. time: 30–60 min
Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Check for actual overheating

    If there was a flame-up or very high-heat event at the cooktop, turn off the burners, allow everything to cool, and clear the hood's grease filters. The F01 may clear on its own once the temperature drops.

  2. 2

    Power cycle

    Turn off circuit breaker for 10 minutes after the cooktop and hood have cooled.

  3. 3

    Test the heat sensor

    The heat sensor is a small disc or rod sensor near the hood's intake. Test resistance — at room temperature it should show a predictable value per the service manual (typically 10–100 kΩ for NTC sensors). Significantly out of range = replace sensor.

    🔩 Multimeter
  4. 4

    Replace the heat sensor

    The sensor is typically clipped or screwed into the underside of the hood canopy.

    🔩 Broan range hood heat sensor ($20–$55)

How to Reset Error Code F01

Allow to cool. Turn off circuit breaker 10 minutes. If F01 returns, test and replace heat sensor.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

When to Call a Professional

If new heat sensor and F01 persists, the control board sensor input has failed.

Average professional repair cost for this issue: $150–$300

Same Code on Other Brands

Error code F01 appears on these other brands too. Click to compare:

Find Replacement Parts

Use these links to find the exact replacement parts for your Broan-NuTone Range Hood:

External links — ApplianceErrors.com is not affiliated with these retailers.

Frequently Asked Questions

What does error code F01 mean on a Broan-NuTone Range Hood? +
Heat sensor tripped — oven or cooktop overheating detected
How do I fix error code F01 on my Broan-NuTone Range Hood? +
Start by If there was a flame-up or very high-heat event at the cooktop, turn off the burners, allow everything to cool, and clear the hood's grease filters. The F01 may clear on its own once the temperature drops.. If that doesn't resolve it, work through each step in the fix guide above.
How do I clear or reset error code F01? +
Allow to cool. Turn off circuit breaker 10 minutes. If F01 returns, test and replace heat sensor.
Is error code F01 serious? +
Medium severity. The appliance may still operate but the issue should be resolved to prevent further damage.