ApplianceErrors.com

LG Washing Machine Error Code LE

High Severity 🔧🔧🔧 Advanced DIY

Motor locked — hall sensor or stator fault

The motor control system has detected that the drum is not spinning as commanded, or current to the motor is excessive. LG direct-drive motors are generally very reliable, but the hall sensor (which monitors rotor position) is a common failure point.

💰 DIY cost: $15–$200 👨‍🔧 Pro cost: $250–$450 Save $235+ by doing it yourself

What Does Error Code LE Mean on a LG Washing Machine?

Motor locked — hall sensor or stator fault.

The motor control system has detected that the drum is not spinning as commanded, or current to the motor is excessive. LG direct-drive motors are generally very reliable, but the hall sensor (which monitors rotor position) is a common failure point.

What Causes Error Code LE?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    Hall sensor (rotor position sensor) failure 45% of cases
  2. 2
    Stator or rotor damage 25% of cases
  3. 3
    Overloaded drum causing motor stall 20% of cases
  4. 4
    Motor control board failure 10% of cases

How to Fix LG Washing Machine Error Code LE

🔧🔧🔧 Advanced DIY Est. time: 1–3 hours
Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Reduce load and retry

    Remove half the laundry and restart. LE from overloading is common.

  2. 2

    Power cycle

    Unplug for 10 minutes. This resets the motor control firmware.

  3. 3

    Replace the hall sensor

    The hall sensor is a small sensor near the rotor. It's inexpensive and often the sole cause of LE. Remove the back panel, locate the sensor near the motor, and swap it.

    🔩 LG hall sensor ($15–$35)
    ⚠️ Unplug washer and lay it on its front to access the motor.
  4. 4

    Inspect the rotor and stator

    Check for damage to the rotor magnets and stator windings. Replace damaged components.

    🔩 LG rotor assembly ($50–$150) 🔩 LG stator assembly ($80–$200)

How to Reset Error Code LE

Unplug for 10 minutes, then restart with a reduced load. After motor sensor replacement, the code clears on the first successful cycle.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

When to Call a Professional

If hall sensor replacement doesn't resolve LE, the stator or main control board needs professional evaluation.

Average professional repair cost for this issue: $250–$450

Related Error Codes

Same Code on Other Brands

Error code LE appears on these other brands too. Click to compare:

Find Replacement Parts

Use these links to find the exact replacement parts for your LG Washing Machine:

External links — ApplianceErrors.com is not affiliated with these retailers.

Frequently Asked Questions

What does error code LE mean on a LG Washing Machine? +
Motor locked — hall sensor or stator fault
How do I fix error code LE on my LG Washing Machine? +
Start by Remove half the laundry and restart. LE from overloading is common.. If that doesn't resolve it, work through each step in the fix guide above.
How do I clear or reset error code LE? +
Unplug for 10 minutes, then restart with a reduced load. After motor sensor replacement, the code clears on the first successful cycle.
Is error code LE serious? +
This is a high-severity error. You should address it soon. Running the appliance may cause further damage.