Maytag Oven Error Code F1-E0

What Does Error Code F1-E0 Mean on a Maytag Oven?

ERC board EEPROM checksum error — control board memory failure.

The Electronic Range Control board failed its internal memory checksum. This is usually caused by a power surge or age-related failure of the board's non-volatile memory. The oven will not operate normally with this fault active.

What Causes Error Code F1-E0?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

1. 1
   Power surge corrupting EEPROM 50% of cases
2. 2
   ERC board age-related failure 35% of cases
3. 3
   Brown-out during a write cycle corrupting memory 15% of cases

How to Fix Maytag Oven Error Code F1-E0

1. 1

   Power cycle the range

   Turn off the circuit breaker for 15 minutes. A power cycle occasionally clears a transient F1-E0 caused by a brown-out.

2. 2

   Replace the ERC control board

   F1-E0 is almost always a board failure. The ERC board is mounted behind the control panel. Remove the back panel or the control panel housing (2–6 screws depending on model) and disconnect all wiring harnesses.

   🔩 Maytag oven ERC board ($120–$300)

   ⚠️ Photograph all wiring harness positions before disconnecting.

How to Reset Error Code F1-E0

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

When to Call a Professional

Related Error Codes

Find Replacement Parts

Use these links to find the exact replacement parts for your Maytag Oven:

External links — ApplianceErrors.com is not affiliated with these retailers.

Frequently Asked Questions