ApplianceErrors.com

Maytag Oven Error Code F3-E2

🛑 Critical — Stop Using 🔧🔧🔧 Advanced DIY Also shown as: F3E2

Oven over-temperature — exceeded safe operating limit

The oven temperature exceeded the maximum safe operating limit, typically above 575°F (302°C) during normal cooking. The ERC board shut off all heating and requires a diagnosis before reuse.

💰 DIY cost: $0–$50 👨‍🔧 Pro cost: $280–$580 Save $280+ by doing it yourself

What Does Error Code F3-E2 Mean on a Maytag Oven?

Oven over-temperature — exceeded safe operating limit.

The oven temperature exceeded the maximum safe operating limit, typically above 575°F (302°C) during normal cooking. The ERC board shut off all heating and requires a diagnosis before reuse.

What Causes Error Code F3-E2?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    Temperature sensor failure causing runaway heating 40% of cases
  2. 2
    Bake relay on ERC board stuck in closed position 35% of cases
  3. 3
    Wiring fault causing continuous power to heating element 15% of cases
  4. 4
    Self-clean cycle runaway 10% of cases

How to Fix Maytag Oven Error Code F3-E2

🔧🔧🔧 Advanced DIY Est. time: 1–3 hours
Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Turn off circuit breaker immediately

    Do not attempt to use the oven again until the fault is diagnosed. Allow the oven to cool fully — at least 1 hour.

    ⚠️ FIRE HAZARD — do not open the oven door or use the oven until diagnosed.
  2. 2

    Test temperature sensor after cooling

    Disconnect and test the oven temperature sensor (should read ~1,080 ohms). A failed open or shorted sensor can cause the ERC board to drive the heating element continuously.

    🔩 Multimeter
  3. 3

    Replace sensor if out of spec

    If sensor reads correctly, the bake relay on the ERC board has stuck closed.

    🔩 Maytag oven temperature sensor ($20–$50) 🔩 Maytag oven ERC board ($120–$300)

How to Reset Error Code F3-E2

Turn off circuit breaker. Do not use until fault is diagnosed by a professional.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

When to Call a Professional

F3-E2 is a safety event. Have a qualified technician diagnose the oven before returning it to service.

Average professional repair cost for this issue: $280–$580

Related Error Codes

Same Code on Other Brands

Error code F3-E2 appears on these other brands too. Click to compare:

Find Replacement Parts

Use these links to find the exact replacement parts for your Maytag Oven:

External links — ApplianceErrors.com is not affiliated with these retailers.

Frequently Asked Questions

What does error code F3-E2 mean on a Maytag Oven? +
Oven over-temperature — exceeded safe operating limit
How do I fix error code F3-E2 on my Maytag Oven? +
Start by Do not attempt to use the oven again until the fault is diagnosed. Allow the oven to cool fully — at least 1 hour.. If that doesn't resolve it, work through each step in the fix guide above.
How do I clear or reset error code F3-E2? +
Turn off circuit breaker. Do not use until fault is diagnosed by a professional.
Is error code F3-E2 serious? +
Yes. This is a critical error. Stop using the appliance immediately to prevent damage or safety hazards.