Maytag Oven Error Code F9-E0
Door latch during lock — general latch circuit fault
A general fault with the door latch circuit occurred during a locking operation. Similar to F5-E1 but triggered from a different latch state.
What Does Error Code F9-E0 Mean on a Maytag Oven?
Door latch during lock — general latch circuit fault.
A general fault with the door latch circuit occurred during a locking operation. Similar to F5-E1 but triggered from a different latch state.
What Causes Error Code F9-E0?
Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:
- 1 Door latch motor failure 55% of cases
- 2 Latch switch misaligned or failed 30% of cases
- 3 ERC board latch circuit failure 15% of cases
How to Fix Maytag Oven Error Code F9-E0
- 1
Power cycle
Turn off circuit breaker for 5 minutes.
- 2
Check door alignment and latch slot
Ensure the oven door closes completely and the latch hook travels freely.
- 3
Replace the door latch assembly
F9-E0 typically points to the latch motor or switch.
🔩 Maytag oven door latch ($50–$120)⚠️ Unplug before accessing.
How to Reset Error Code F9-E0
Unplug 5 minutes. If F9-E0 returns, replace door latch assembly.
Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.
When to Call a Professional
If latch is replaced and F9-E0 persists, the ERC board latch relay or wiring has failed.
Related Error Codes
Same Code on Other Brands
Error code F9-E0 appears on these other brands too. Click to compare:
Find Replacement Parts
Use these links to find the exact replacement parts for your Maytag Oven:
External links — ApplianceErrors.com is not affiliated with these retailers.