ApplianceErrors.com

Maytag Oven Error Code SAB

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: July 19, 2026
✓ Low Severity 🔧 Easy DIY Also shown as: Sabbath

Sabbath mode active — special operating mode, not a fault

The most common cause of the SAB error on a Maytag oven is sabbath mode turned on intentionally (~75% of cases); start with: exit sabbath mode.

💰 DIY cost: $0–$0 👨‍🔧 Pro cost: $0–$0
Maytag Oven error code SAB on the display panel
How the SAB code appears on a Maytag oven display

What Does Error Code SAB Mean on a Maytag Oven?

Sabbath mode active — special operating mode, not a fault.

SAB is not a fault; it confirms the oven's control board has entered Sabbath mode, a certified state that suppresses the display, tones, interior light response, and the 12-hour auto-shutoff so the appliance can run continuously without user interaction. Unlike LOC, which locks the control panel against input, SAB deliberately limits feedback while keeping a set bake temperature active. The board reports it as an operating mode, so no error condition, timer, or diagnostic is triggered.

Models affected: Maytag electronic-control ranges and wall ovens with a Sabbath/Delay feature, including models such as the MER8800FZ
What owners report: Owners commonly report SAB appearing after holding the Sabbath or Delay keys, sometimes triggered accidentally while trying to set a timer or delayed bake. The usual quick win is repeating the manual's key sequence to exit, and a one-minute breaker cycle reportedly clears it if the display stays unresponsive.

What Causes Error Code SAB?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    Sabbath mode turned on intentionally 75% of cases
  2. 2
    Sabbath mode enabled accidentally 25% of cases

How to Fix Maytag Oven Error Code SAB

🔧 Easy DIY Est. time: 10–20 min
⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Exit Sabbath mode

    Follow your model's procedure (often holding the Sabbath/Delay or specific keys) to turn Sabbath mode off.

  2. 2

    Power cycle if needed

    If the controls remain limited, cut power at the breaker for one minute and retry.

How to Reset Error Code SAB

Follow the manual's steps to exit Sabbath mode; a power cycle also clears it on most models.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Did this guide fix your appliance?

When to Call a Professional

Sabbath mode is normal operation; no repair is needed unless the controls stay limited after exiting.

Average professional repair cost for this issue: $0–$0

Related Error Codes

LOC
Control lock active — keypad intentionally locked
✓ Low Severity

Find Replacement Parts

Use these links to find the exact replacement parts for your Maytag Oven:

🔩
Search PartSelect
Maytag Oven repair parts
🔧
Search RepairClinic
Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Maytag Oven Error Codes

F1-E0 ERC board EEPROM checksum error — control board memory failure F1-E1 ERC board keypad stuck key — shorted keypad detected during power-up F2-E0 Shorted keypad — stuck key during normal operation F2-E1 Keypad disconnected — ribbon cable failure F3-E0 Oven temperature sensor open circuit F3-E1 Oven temperature sensor short circuit

Frequently Asked Questions

Can I keep using my Maytag Oven when error SAB appears? +
Usually yes — SAB is a low-severity control-panel notice that rarely stops the oven from working, but clearing the underlying cause prevents it from escalating.
What most commonly causes SAB on a Maytag Oven? +
Across reported Maytag oven repairs, the most frequent is sabbath mode turned on intentionally (75% of cases) then sabbath mode enabled accidentally (25%). Check them in that order before replacing any parts.
SAB keeps coming back after a reset — what should I check next? +
A reset only clears the stored SAB fault; if it returns, the control-panel problem is still present. Move on to the physical checks — exit Sabbath mode, then power cycle if needed — since the code will reappear until the root cause is resolved. This is a beginner-friendly job needing only basic hand tools.
How much does it cost to fix Maytag Oven error SAB? +
A DIY repair typically runs $0–$0 in parts, versus $0–$0 for a professional service call. Expect the work to take about 10–20 minutes.
Which Maytag Oven models show error SAB? +
SAB is documented on Maytag electronic-control ranges and wall ovens with a Sabbath/Delay feature, including models such as the MER8800FZ. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

Content verified against manufacturer service documentation. Last verified: July 19, 2026.

← All Maytag Oven Error Codes ← All Maytag Error Codes