Samsung Dishwasher Error Code tE
Temperature sensor failure — NTC thermistor fault
The water temperature sensor in the dishwasher has failed. Heating and sanitize functions are disabled.
What Does Error Code tE Mean on a Samsung Dishwasher?
Temperature sensor failure — NTC thermistor fault.
The water temperature sensor in the dishwasher has failed. Heating and sanitize functions are disabled.
What Causes Error Code tE?
Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:
- 1 Thermistor open circuit 65% of cases
- 2 Connector loose 25% of cases
- 3 Wiring fault 10% of cases
How to Fix Samsung Dishwasher Error Code tE
- 1
Test thermistor
At room temperature: 6k–7k ohms expected.
🔩 Multimeter - 2
Check connector
Reseat firmly.
- 3
Replace thermistor
Typically located near the heating element.
🔩 Samsung dishwasher NTC ($15–$35)
How to Reset Error Code tE
After repair, run a test cycle.
Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.
When to Call a Professional
If new thermistor and error persists, control board sensor input failed.
Related Error Codes
Same Code on Other Brands
Error code tE appears on these other brands too. Click to compare:
Find Replacement Parts
Use these links to find the exact replacement parts for your Samsung Dishwasher:
External links — ApplianceErrors.com is not affiliated with these retailers.