Whirlpool Dryer Error Code L2
Low or missing voltage on one leg of 240V supply
Electric dryers run on 240V (two 120V legs). If one leg loses power, the motor runs (on 120V) but the heater does not (needs both legs). The dryer tumbles but produces no heat, and may display L2.
What Does Error Code L2 Mean on a Whirlpool Dryer?
Low or missing voltage on one leg of 240V supply.
Electric dryers run on 240V (two 120V legs). If one leg loses power, the motor runs (on 120V) but the heater does not (needs both legs). The dryer tumbles but produces no heat, and may display L2.
What Causes Error Code L2?
Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:
- 1 One circuit breaker leg tripped 60% of cases
- 2 Loose wire connection in dryer outlet or at panel 25% of cases
- 3 Failed outlet or wiring 15% of cases
How to Fix Whirlpool Dryer Error Code L2
- 1
Reset the circuit breaker
Go to the panel and find the double-pole breaker for the dryer. Toggle it fully OFF then back ON.
- 2
Check the outlet voltage
With a multimeter on the outlet, between both hot terminals: should read ~240V. Each hot to neutral: ~120V. If one reads 0V, that leg has no power.
🔩 Multimeter or outlet voltage tester - 3
Have an electrician check the wiring
If the breaker reset and outlet checks don't resolve L2, the outlet wiring or breaker needs professional inspection.
How to Reset Error Code L2
Reset the circuit breaker. L2 clears when full 240V is restored.
Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.
When to Call a Professional
L2 is almost always an electrical supply problem, not a dryer fault. An electrician should check the outlet and panel wiring if the breaker reset doesn't fix it.
Related Error Codes
Find Replacement Parts
Use these links to find the exact replacement parts for your Whirlpool Dryer:
External links — ApplianceErrors.com is not affiliated with these retailers.