W1 Series Error Codes — Miele Washing Machine
🏷️ Model: W1 Series 📅 Production: 2016–present 🫧 Type: Washing Machine
Miele's 24-inch W1 platform. F-numbered codes display on the panel; F11 drainage faults and F53 speed-sensor codes are the most commonly searched.
Most Common Codes on the W1 Series
All Other Miele Washing Machine Codes
The W1 Series can also display any of the standard Miele washing machine codes:
F16 Water protection system activated — flood protection triggered F31 NTC temperature sensor fault F1 NTC temperature sensor short-circuited F2 NTC temperature sensor open-circuited F15 Hot water intake fault F20 Heating fault — water not reaching target temperature F34 Door lock fault — door will not lock F35 Door unlock fault — door will not release F39 Electronic unit fault — main control failure F41 Faulty electronic memory — incorrect data F43 Appliance model not programmed F45 Defective Flash RAM — incorrect data supplied F50 Drive fault — motor or drive electronics F51 Pressure/level sensor fault F56 Spin fault — final spin speed below 400 rpm F63 Water path control unit fault F65 Drum lighting cap missing
💡 Tip: Your model's serial sticker (door frame, rim, or back panel) confirms the exact
model number. Codes can differ between revisions of the same model line — if a code on your display
isn't listed here, check the
full Miele washing machine code list.