NX58R5601SS Error Codes — Samsung Oven
🏷️ Model: NX58R5601SS 📅 Production: 2019–present 🔥 Type: Oven
5.8 cu ft gas range with illuminated knobs. Temperature-sensor codes dominate; the oven sensor is an inexpensive DIY part on this model.
Most Common Codes on the NX58R5601SS
All Other Samsung Oven Codes
The NX58R5601SS can also display any of the standard Samsung oven codes:
E-09 Oven temperature sensor short circuit E-0A Oven overheating — temperature above safe limit NF No flame detected — gas ignition failure (gas range models) E-43 Power relay failure on main control board C-D0 Button/key problem — a key is registering as pressed C-20 Oven temperature sensor fault — check needed C-21 Oven temperature too high — sensor reads above setpoint dC Divider/partition check needed (Flex Duo / Dual Cook models) door Door error — door state cannot be confirmed
💡 Tip: Your model's serial sticker (door frame, rim, or back panel) confirms the exact
model number. Codes can differ between revisions of the same model line — if a code on your display
isn't listed here, check the
full Samsung oven code list.