Frigidaire Oven Error Code F13

What Does Error Code F13 Mean on a Frigidaire Oven?

Control board internal checksum error.

The Electronic Range Control (ERC) board failed its internal memory self-check. The board's EEPROM or program memory has been corrupted, possibly by a power surge.

What Causes Error Code F13?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

1. 1
   Power surge corrupting board EEPROM 50% of cases
2. 2
   Control board general failure 35% of cases
3. 3
   Loose connection on board power supply 15% of cases

How to Fix Frigidaire Oven Error Code F13

1. 1

   Power cycle

   Turn off circuit breaker for 15 minutes. On rare occasions, a transient F13 from a brown-out clears with a full power cycle.

2. 2

   Check wiring connections to board

   Disconnect all ribbon cables and wiring harnesses from the ERC board, then reseat them. Loose connections can cause erratic board behavior.

3. 3

   Replace the ERC control board

   F13 is almost always a board failure. The ERC board sits behind the control panel — remove the back service panel or the front control panel depending on the model.

   🔩 Frigidaire oven ERC board ($100–$280)

   ⚠️ Photograph all wiring before disconnecting.

How to Reset Error Code F13

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

When to Call a Professional

Related Error Codes

Same Code on Other Brands

Error code F13 appears on these other brands too. Click to compare:

Miele Dishwasher F13

No discharge — drain problem

Find Replacement Parts

Use these links to find the exact replacement parts for your Frigidaire Oven:

External links — ApplianceErrors.com is not affiliated with these retailers.

Frequently Asked Questions