Frigidaire Oven Error Code F14
EEPROM error — control board memory fault
A variant of the board memory fault. The ERC board has detected an error in its non-volatile storage (EEPROM) that holds calibration and configuration data.
What Does Error Code F14 Mean on a Frigidaire Oven?
EEPROM error — control board memory fault.
A variant of the board memory fault. The ERC board has detected an error in its non-volatile storage (EEPROM) that holds calibration and configuration data.
What Causes Error Code F14?
Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:
- 1 Power surge corrupting EEPROM data 55% of cases
- 2 ERC board age/failure 35% of cases
- 3 Intermittent power causing incomplete write cycles 10% of cases
How to Fix Frigidaire Oven Error Code F14
- 1
Power cycle
Turn off circuit breaker for 15 minutes.
- 2
Replace the ERC control board
F14 is a board-level EEPROM fault and cannot be repaired by resetting alone.
🔩 Frigidaire oven ERC board ($100–$280)⚠️ Photograph all wiring before disconnecting.
How to Reset Error Code F14
Turn off circuit breaker 15 minutes. If F14 returns, replace ERC board.
Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.
When to Call a Professional
Replace the ERC board. This is not a DIY repair unless you are comfortable with oven electronics.
Related Error Codes
Find Replacement Parts
Use these links to find the exact replacement parts for your Frigidaire Oven:
External links — ApplianceErrors.com is not affiliated with these retailers.