Frigidaire Oven Error Code F30
Oven temperature probe failure — open circuit
The oven temperature sensor (probe) has failed with an open circuit. The oven cannot safely regulate temperature.
What Does Error Code F30 Mean on a Frigidaire Oven?
Oven temperature probe failure — open circuit.
The oven temperature sensor (probe) has failed with an open circuit. The oven cannot safely regulate temperature.
What Causes Error Code F30?
Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:
- 1 Probe burned out 70% of cases
- 2 Connector loose at board 20% of cases
- 3 Wiring damaged 10% of cases
How to Fix Frigidaire Oven Error Code F30
- 1
Test probe resistance
Should read ~1,100 ohms at room temperature.
🔩 Multimeter - 2
Replace probe
Unscrew from oven back wall and install new probe.
🔩 Frigidaire oven temperature probe ($25–$55)
How to Reset Error Code F30
After replacing probe, run oven on short bake cycle to confirm.
Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.
When to Call a Professional
If probe is new and tests correctly, control board sensor input has failed.
Related Error Codes
Same Code on Other Brands
Error code F30 appears on these other brands too. Click to compare:
Find Replacement Parts
Use these links to find the exact replacement parts for your Frigidaire Oven:
External links — ApplianceErrors.com is not affiliated with these retailers.