GE Appliances Washing Machine Error Code E52
Spin speed error — motor not reaching target RPM
The washer motor is not spinning the drum at the commanded speed. Clothes will exit the cycle still wet.
What Does Error Code E52 Mean on a GE Appliances Washing Machine?
Spin speed error — motor not reaching target RPM.
The washer motor is not spinning the drum at the commanded speed. Clothes will exit the cycle still wet.
What Causes Error Code E52?
Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:
- 1 Drum overloaded preventing motor from reaching speed 40% of cases
- 2 Worn motor brushes (on brush-type motors) 30% of cases
- 3 Drive belt slipping or broken 20% of cases
- 4 Motor control board fault 10% of cases
How to Fix GE Appliances Washing Machine Error Code E52
- 1
Reduce load
Remove items and retry with a smaller load.
- 2
Check drive belt
On belt-driven models, inspect the belt for wear, stretching, or breakage.
🔩 GE washer drive belt ($15–$35) - 3
Inspect motor brushes
On brushed DC motors, worn brushes cause speed loss. Replace if worn below 1/4 inch.
🔩 GE motor brush kit ($15–$35)
How to Reset Error Code E52
After repair, run a Spin Only cycle to confirm.
Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.
When to Call a Professional
If belt and brushes are fine and error persists, motor control board testing is required.
Related Error Codes
Find Replacement Parts
Use these links to find the exact replacement parts for your GE Appliances Washing Machine:
External links — ApplianceErrors.com is not affiliated with these retailers.