GE Appliances Washing Machine Error Code E71
NTC temperature sensor failure — open circuit
The NTC thermistor (water temperature sensor) has an open circuit and is not providing temperature readings to the control board. The washer's heating function is disabled.
What Does Error Code E71 Mean on a GE Appliances Washing Machine?
NTC temperature sensor failure — open circuit.
The NTC thermistor (water temperature sensor) has an open circuit and is not providing temperature readings to the control board. The washer's heating function is disabled.
What Causes Error Code E71?
Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:
- 1 Thermistor burned out 70% of cases
- 2 Thermistor connector disconnected 20% of cases
- 3 Wiring fault to thermistor 10% of cases
How to Fix GE Appliances Washing Machine Error Code E71
- 1
Test thermistor
Disconnect and test resistance with multimeter. Room temperature reading should be approximately 6k–12k ohms.
🔩 Multimeter - 2
Check connector
Reseat connector firmly at the thermistor mounting.
- 3
Replace thermistor
Install new thermistor and ensure it's properly clipped to the heater or drum housing.
🔩 GE washer thermistor ($15–$40)
How to Reset Error Code E71
After repair, unplug 1 minute and restart.
Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.
When to Call a Professional
If thermistor is new and tests correctly but error persists, control board sensor input has failed.
Related Error Codes
Find Replacement Parts
Use these links to find the exact replacement parts for your GE Appliances Washing Machine:
External links — ApplianceErrors.com is not affiliated with these retailers.