Whirlpool Oven Error Code F3-E0
Oven temperature sensor open circuit
The oven temperature sensor (RTD probe) has an open circuit. The oven will not heat safely without temperature feedback.
What Does Error Code F3-E0 Mean on a Whirlpool Oven?
Oven temperature sensor open circuit.
The oven temperature sensor (RTD probe) has an open circuit. The oven will not heat safely without temperature feedback.
What Causes Error Code F3-E0?
Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:
- 1 Sensor failure (open circuit) 65% of cases
- 2 Sensor connector loose 25% of cases
- 3 Wiring harness to sensor damaged 10% of cases
How to Fix Whirlpool Oven Error Code F3-E0
- 1
Test the sensor
At room temperature, Whirlpool oven sensors read approximately 1,080–1,090 ohms. Open circuit = failed sensor.
🔩 Multimeter - 2
Check connector at sensor
Reseat the 2-pin connector.
- 3
Replace the sensor
Located in the upper-back of the oven cavity.
🔩 Whirlpool oven temperature sensor ($20–$50)⚠️ Let oven cool completely.
How to Reset Error Code F3-E0
After replacing sensor, turn on and test with a 350°F bake cycle.
Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.
When to Call a Professional
If new sensor and F3E0 persists, ERC board sensor input has failed.
Related Error Codes
Same Code on Other Brands
Error code F3-E0 appears on these other brands too. Click to compare:
Find Replacement Parts
Use these links to find the exact replacement parts for your Whirlpool Oven:
External links — ApplianceErrors.com is not affiliated with these retailers.