Whirlpool Oven Error Code F5-E0
Door switch failure — latch not sensing door position
The door switch is not detecting the door position correctly during a self-clean cycle or normal operation.
What Does Error Code F5-E0 Mean on a Whirlpool Oven?
Door switch failure — latch not sensing door position.
The door switch is not detecting the door position correctly during a self-clean cycle or normal operation.
What Causes Error Code F5-E0?
Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:
- 1 Door switch contacts worn 50% of cases
- 2 Door hinge misalignment 30% of cases
- 3 Wiring to door switch damaged 20% of cases
How to Fix Whirlpool Oven Error Code F5-E0
- 1
Check door closes flush
The door must close completely and evenly.
- 2
Test door switch
The switch is typically near the door latch. Test continuity with door open and closed.
🔩 Whirlpool oven door switch ($15–$40) - 3
Replace door switch
If contacts have failed.
How to Reset Error Code F5-E0
Power cycle 5 minutes. Check door alignment and switch.
Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.
When to Call a Professional
If door switch replaced and F5E0 persists, the ERC board door switch input has failed.
Related Error Codes
Find Replacement Parts
Use these links to find the exact replacement parts for your Whirlpool Oven:
External links — ApplianceErrors.com is not affiliated with these retailers.