Whirlpool Oven Error Code F3-E2

What Does Error Code F3-E2 Mean on a Whirlpool Oven?

Oven over-temperature — temp exceeded safe limit.

The oven temperature exceeded the maximum safe limit during normal cooking (typically above 590°F/310°C).

What Causes Error Code F3-E2?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

1. 1
   Temperature sensor failure causing runaway heating 40% of cases
2. 2
   Bake relay stuck on control board 35% of cases
3. 3
   Wiring fault 15% of cases
4. 4
   Self-clean cycle issue 10% of cases

How to Fix Whirlpool Oven Error Code F3-E2

1. 1

   Turn off circuit breaker immediately

   Allow oven to cool completely — 1 full hour minimum.

   ⚠️ Do not open oven door. Stand clear.
2. 2

   Test temperature sensor after cooling

   Sensor should read ~1,080 ohms. Failed sensor can cause runaway heating.

   🔩 Multimeter
3. 3

   Replace sensor or control board

   If sensor is good, the heating relay on the ERC board is stuck closed.

   🔩 Whirlpool oven temperature sensor ($20–$50) 🔩 Whirlpool ERC board ($150–$380)

How to Reset Error Code F3-E2

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

When to Call a Professional

Related Error Codes

Same Code on Other Brands

Error code F3-E2 appears on these other brands too. Click to compare:

Maytag Oven F3-E2

Oven over-temperature — exceeded safe operating limit

Find Replacement Parts

Use these links to find the exact replacement parts for your Whirlpool Oven:

External links — ApplianceErrors.com is not affiliated with these retailers.

Frequently Asked Questions